BRAND: JL Audio
SERIES: D110
TYPE: Subwoofers
TYPE: Subwoofers
The Dominion™ powered subwoofers benefit from JL Audio’s expertise in driver and amplifier design to arrive at a unique solution for applications requiring a compact, more affordable subwoofer.
OVERVIEW
Unlike any other product in its price class, the Dominion™ powered subwoofer employs a purpose-engineered, long excursion driver, built on JL Audio’s exclusive DMA motor optimization technology. This leads to reduced distortion at higher output levels, as well as improved dynamic tracking and resolution.
The Dominion™ amplifier is also purpose-engineered, featuring an advanced Class D design, with a tightly-regulated switching power supply (another rarity in this price class). These technologies ensure that the Dominion™ powered subwoofer remains in its comfort zone, well past the point where most small subwoofers run out of power or driver capability.
Dominion™ powered subwoofers can be used in full home theater systems, media room systems, dedicated two-channel music systems, desktop audio workstations and small recording studios, just to name a few potential applications. High-level inputs even make it possible to add a subwoofer to systems lacking line outputs. The available Wireless Link port operates with a JLINK™ TRX system (sold separately) to deliver an invisible, cable-free connection from your source unit, up to 100 feet (30 meters) away.
Every Dominion™ powered subwoofer is precision-built in JL Audio’s U.S. factory to deliver years of listening enjoyment.
Share
TECHNICAL SPECIFICATIONS
Unbalanced Inputs:
Stereo or Mono (two RCA jacks)
High-Level Inputs:
Stereo or Mono (removable plug)
Wireless Inputs:
Bit-Perfect PCM Stereo Digital via 2.4 GHz Wireless (when used with JLINK™ TRX – sold separately)
Frequency Response: (anechoic)
27 – 111 Hz (±1.5dB)
–3 dB at 25 Hz / 118 Hz
–10 dB at 21 Hz / 143 Hz
Input Grounding:
Selectable (Isolated or Grounded)
Input Impedance:
Line Inputs: 20 kΩ
High-Level Inputs: 4.4 kΩ
Level Control:
Variable: full mute to +15 dB over reference gain
Effective Piston Area:
48.71 sq. in. (0.0314 sq. m)
Effective Displacement:
127 cu. in. (2.08 liters)
Low-Pass Filter:
24 dB per octave with Linkwitz-Riley alignment
Low-Pass Cutoff Frequency Range:
Variable: 25 Hz – 130 Hz
Enclosure Type:
Sealed
Drivers:
Single 10-inch (nominal diameter)
Power On/Off:
Automatic Signal-Sensing only
Amplifier Power:
750 watts RMS short-term
Dimensions* (H x W x D):
13.4 in. x 12 in. x 15.86 in.
340 mm x 305 mm x 403 mm
Polarity:
0 or 180 degrees
Net Weight:
38.2 lbs. (17.3 kg)
Phase:
Variable from 0 – 280 degrees, referenced to 80 Hz
Cabinet Finish:
High-Gloss Black or Black Ash Vinyl Veneer
Built in USA
with imported and domestic components
