BRAND: ORTOFON

SERIES: Quintet Series
TYPE: 
Cartridge

The MC Quintet Series is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration. A special ABS (Acrylonitrile/Butadiene/Styrene) thermoplastic material is used for manufacturing of the body. This light-weight, impact resistant material is very suitable for injection-moulding and provides a very durable scratch resistant surface. Neodymium magnets are implemented to achieve an optimal output.

OVERVIEW

Low internal impedance makes the cartridge less sensitive to load and therefore ensures compatibility with the widest range of preamps and transformers. Ease of use Top-mounting of the Quintet cartridges is easy and secure using the screws supplied. The aluminuim frame has threaded mounting holes and is fitted easily with the 5mm or 7mm screws depending on the thickness of the headshell. The Quintet series’ right angles, straight lines, stylus visibility and ample distance between the record surface and the cartridge’s bottom will make it easy to mount and align the cartridge and tonearm correctly. The Quintet Series gives excellent results with most common tonearms.

Share

TECHNICAL SPECIFICATIONS

Output voltage at 1 kHz, 5 cm/sec.
0.3 mV

Channel balance at 1 kHz
1.5 dB

Channel separation at 1 kHz
21 dB

Channel separation at 15 kHz
14 dB

Frequency range at -3 dB
20-25.000 Hz

Frequency response 20-20.000 Hz
2.0 dB

Tracking ability at 315 Hz at recommended tracking force
70 um

Compliance, dynamic, lateral
15 um/mN

Stylus type
Nude Elliptical

Stylus tip radius
r/R 8/18 µm 

 

Tracking force range
2.1-2.5 g (21-25 mN)

Tracking force, recommended
2.3 g (23 mN)

Tracking angle
20°

Internal impedance, DC resistance
5Ohm

Recommended load impedance
20 Ohm

Cartridge body material
ABS/Alu

Coil wire material
Pure 4-nines silver

Cartridge colour
White

Cartridge weight
9 g

 

 

OTHER PRODUCTS: ACCESSORIES / CARTRIDGE