BRAND: ORTOFON
SERIES: Xpression
TYPE: Cartridge\
The Ortofon Xpression is a modern High-End cartridge with a standard headshell connector. The state of the art product, the Ortofon Expression represents a combination of three following elements very characteristic for Ortofon the cutting edge SLM materials technology pioneered by the MC A90 and SPU 90th Anniversary products modification of the generator system introduced with the MC A90 and the MC Windfeld Ortofon design tradition
The Xpression cartridge bridges the gap between SPU-type cartridges and High-End cartridges like the MC A90 and the MC Windfeld designed for headshell mounting. The result is a high-performance moving coil cartridge with the convenience of a standard headshell connector, which provides a simple and elegant method of directly connecting the generator and tonearm via the Xpression’s one-piece body. Since the cartridge length is identical to that of an SPU, the Xpression can easily be fitted onto a large selection of tonearms without additional concern for proper alignment. The cartridge height is also identical to that of an SPU, making further VTA adjustments unnecessary. Additionally, the mass and compliance properties of the Xpression ensure that a proper match will be achieved with most SPU-compatible arms, including the new Ortofon TA-110 and TA-210 tonearms.
OVERVIEW
The Ortofon Xpression is a modern High-End cartridge with a standard headshell connector. The state of the art product, the Ortofon Expression represents a combination of three following elements very characteristic for Ortofon the cutting edge SLM materials technology pioneered by the MC A90 and SPU 90th Anniversary products modification of the generator system introduced with the MC A90 and the MC Windfeld Ortofon design tradition.
The Xpression cartridge bridges the gap between SPU-type cartridges and High-End cartridges like the MC A90 and the MC Windfeld designed for headshell mounting. The result is a high-performance moving coil cartridge with the convenience of a standard headshell connector, which provides a simple and elegant method of directly connecting the generator and tonearm via the Xpression’s one-piece body. Since the cartridge length is identical to that of an SPU, the Xpression can easily be fitted onto a large selection of tonearms.
without additional concern for proper alignment. The cartridge height is also identical to that of an SPU, making further VTA adjustments unnecessary. Additionally, the mass and compliance properties of the Xpression ensure that a proper match will be achieved with most SPU-compatible arms, including the new Ortofon TA-110 and TA-210 tonearms.
Share
TECHNICAL SPECIFICATIONS
Output voltage at 1 kHz, 5 cm/sec.
0.3 mV
Channel balance at 1 kHz
0.2 dB
Channel separation at 1 kHz
28 dB
Channel separation at 15 kHz
22 dB
Frequency range at – 3 dB
10 – 60 kHz
Frequency response
20 Hz – 20 kHz +0.5 –1.5 dB
Tracking ability at 315 Hz at recommended tracking force
90 um
Compliance, dynamic, lateral
11 μm/mN
Stylus type
Special polished Nude Ortofon
Replicant 100 on boron cantilever
Stylus tip radius
r/R 5/100 μm
Tracking force range
2.3 – 2.8 g (23-28 mN)
Tracking force, recommended
2.6 g (26 mN)
Tracking angle
23°
Internal impedance, DC resistance
4 Ohm
Recommended load impedance
10 Ohm
Cartridge body material
SLM Stainless Steel and Special proprietary TPE-compound
Cartridge colour
Black
Cartridge weight
28 g