BRAND: Sonus Faber
SERIES: Olympica Center
The theater represents the pinnacles of harmonious design, proportions, and sensitivity; a search for beauty, wonder, exquisite materials and emotions. It is a temple of geometric perfection in the voice of music, a vessel in which sound seamlessly expands as an exemplary reference model of acoustic enhancement.
Sonus faber is also borne of this same fertile ground. From its very beginnings, the teachings and history of the region have been infused with the fundamental principles applied to the musical instruments created by Sonus faber; products which resonate with the harmony of the city and art that inspired them.
Sonus faber wanted to create a family of speakers rich in design, evocative of those visual and tactile emotions characterized by its production. Wood and leather blend with timeless craftsmanship, the final result communicating a love and passion for music.
The Sonus faber Olympica project is made up of a new family of passive acoustic speakers that will add to the existing catalogue from the Vicenza factory, characterized by the use of two iconic Sonus faber materials: walnut wood and leather.
The launch of the new family has occurred in two phases. The first three models, Olympica I (2-way bookshelf), Olympica II (3-way floor-standing) and Olympica III (3way floorstanding), has been presented to the world at the prestigious trade show Munich High End 2013 from 9 – 12 May, while Olympica Center has made its premier on September 2013.
3 way floorstanding, paralaminar “stealth ultraflex” vented loudspeaker.
Enhanced “Lyre” shape design, progressive thickness triple curvature cabinet walls damped spread resonance spectrum system. Solid walnut vertical clamps.
Sonus faber “Arrow Point” DAD (Damped Apex Dome, synthesis of the classic dome and ring transducer) 29XTR2. A Sonus faber designed 29 mm moving coil driver. The ultra dynamic linearity is given by the new Neodymium motor system.
Sonus faber M8XTR. A Sonus faber designed 80 mm ultra dynamic linearity midwoofer. CCAW wire is used on a controlled “eddy current free” voice coil. The dynamically linear magnetic field motor has a focused field geometry. A special custom diaphragm is made with a blend of traditional cellulose pulp, kapok, kenaf and other natural fibers, developed according to the most natural sound. To further inhibit any residual cone coloration we are using a transparent viscous surface damping coating. A special coaxial anti-compressor is used, designed to remove cavity resonance and distortions.
Sonus faber W15XTR. A totally Sonus faber designed 150 mm ultra dynamic linearity woofer. CCAW wire is used on a composite former “eddy current free” voice coil. The dynamically linear magnetic field motor incorporates triple Kellog/ Goeller rings. A special custom diaphragm is made with a real time air dried non pressed blend of traditional cellulose pulp, kapok, kenaf and other natural fibers, developed according to the most natural sound. To further inhibit any residual cone coloration we are using a transparent viscous surface damping coating.
Non-resonant “progressive slope” design, optimized amplitude/phase response for optimal space/time performance. “Paracross topology” on both tweeter hi-pass and midrange band pass, cross-over points 250 Hz – 2.500 Hz. Highest quality components are used including Mundorf Evo Oil capacitors and Jantzen inductors.
50 Hz – 30.000 Hz, tuning port included.
88 dB SPL (2.83 V/1m).
SUGGESTED AMPLIFIER POWER OUTPUT
50W – 300W, without clipping.
LONG-TERM MAXIMUM INPUT VOLTAGE (IEC-268-5)
Natural walnut or graphite multicoated with medium gloss ecologically sensitive lacquer.
30 x 649 x 353 mm (HxWxD).
OPTIONAL DEDICATED STAND
443 x 438 x 310 mm (HxWxD).