BRAND: ORTOFON
SPU Synergy G
TYPE: Cartridge\
The SPU Synergy G modernizes the classic SPU design with a number of optimizations designed for optimum compatibility and sonic purity
OVERVIEW
The SPU Synergy features a wood-based housing and has a revised generator system which allows for a maximum output of 0.5 mV, relaxing the requirement for high gain transformer or active preamplification systems.
While still making use of a highly polished Nude Elliptical stylus, the stylus tip mass has been reduced significantly, resulting in reduced VTF and higher tracking ability.
Share on facebook
Share
TECHNICAL SPECIFICATIONS
Output voltage at 1000 Hz, 5cm/sec.
0.5 mV
Channel balance at 1 kHz
< 1.5 dB
Channel separation at 1 kHz
> 23 dB
Channel separation at 15 kHz
> 15 dB
Frequency response
20-20.000 Hz ± 2 dB
Tracking ability at 315Hz at recommended tracking force *)
> 60 µm
Compliance, dynamic, lateral
8 µm/mN
Stylus type
Nude Elliptical
Stylus tip radius
r/R 8/18 µm
*) Typical value
Tracking force range
3.0-4.0 g (30-40 mN)
Tracking force, recommended
3.5 g (35 mN)
Tracking angle
20°
Internal impedance, DC resistance
2 ohm
Recommended load impedance
10 – 50 ohm
Cartridge body material
Ground wood and resin composite
Coilwire material
High Purity Copper (OFC)
Cartridge colour
Shiny Black
Cartridge weight
30 g
