BRAND: Sonus Faber

SERIES: Venere 3.0
TYPE: Loudspeakers

The Venere line is made up of two floor-standing models (Venere 3.0 e 2.5), two bookshelf models (Venere 2.0 e 1.5 for which a specially dedicated stand was designed, the Venere stand), a central channel (Venere centre) and a wall-mounted model (Venere wall). This group of 6 speakers was carefully designed in order to satisfy both the lovers of two channel listening as well as multi-channel or home theatre enthusiasts. It is therefore able to provide high level response to a wide range of requirements and for an even larger range of listeners, because well reproduced music continues to be a wealth for all.



In the Venere family we have considered the cornerstones of the history of Sonus faber, where tradition and innovation combine in a cabinet design inspired by the lyre shape of Aida, with a tilted top embellished by a sculpted element in tempered glass. The double curve of its sides guarantees enormous structural strength and perfect control of the resonances generated by the drivers, just as the front positioning of the reflex conduct (elegantly veiled by the acoustic cloth) and the aerodynamic cabinet rear promote the versatility of use and ease of integration in the listening environment. This element of ease can also be found in its piloting, so much so as to define these Musical instruments as eclectic, friendly, a good choice for anyone in all conditions. In the tradition of Sonus faber, great attention has been given to the management of the acoustic signal, thanks to the implementation of bi-wiring terminals and the design of the crossover characterised by choices aimed at giving priority to a clean signal path and thus authentic music reproduction. The drivers are entirely designed and developed by Sonus faber with the precious contribution of Joseph Szall, a true luminary in speakers and a constant member of the Technical Team of Sonus faber Labs. In all models of the family the reproduction of the high range is given over to a 29mm tweeter with a soft dome in german DKM silk which ensures immense naturalness in emissions, exceptional dispersion and detail. The mid-low and low range frequencies are handled by speakers that have ‘free compression designed’ baskets and composite plastic Curv cones which guarantee uniformity in the tone and great speed and control. The performance of all the drivers is enhanced by careful design and construction and through the unprecedented development of the front panel, which drives sound waves, and gives a lively and involving sound and perfect control of the emission phase thanks to the calibrated inclination of the front baffle.

Share on facebook



Loudspeaker System
3.5 way floorstanding vented box

29 mm high definition precoated fabric dome driver with no ferrofluid. Sonus faber design.

1×150 mm cone driver. Free compression basket design and thermomouldered polypropylene textile cone (Curv). Ultra dynamic performance and linearity. Special coaxial anti-compressor is used to remove resonances and distortions. Sonus faber design.

2×180 mm driver. Free compression basket design and Curv cone. Ultra dynamic performance and linearity. Sonus faber design.

Cross-over points

Frequency Resp.
38 Hz-25.000 Hz


Sensitivity (2.83V/1m)
90 dB SPL

Nominal impendence
6 ohm

Suggested Amplifier Power Output
40W – 300W without clipping

Long-term max input voltage (iec-268-5)
22V rms

Dimensions  HxWxD (mm)

total dimensions HxWxD (mm)

Weight (kg)
19,45 each